Product ID:6-510 (070992E), SPEEDHIDE LATEX S/G WHITE (SUPDAT)
MSDS Date:11/25/1992
FSC:8010
NIIN:00N029950
MSDS Number: BXSMK

PPG INDUSTRIES INC

4325 ROSANNA DR
ALLISON PARK, PA 15101
US

Emergency Phone: 304-843-1300

Info Phone: 412-492-5555

Cage: 47695

PPG INDUSTRIES INC

PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

TITANIUM OXIDE; (TITANIUM DIOXIDE)

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 20-25%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST

CLAY (KAOLIN); (CLAY)

CAS: 1332-58-7

RTECS: GF1670500

Fraction By Weight: 2-5%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 2 MG/M3 TDUST

WATER; (TAP WATER)

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 30-35%

OSHA PEL N/K

ACGIH TLV: N/K

WATER; (DEIONIZED WATER)

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 20-25%

OSHA PEL N/K

ACGIH TLV: N/K

FILM FORMERS, RESINS, & ADDITIVES

Fraction By Weight: 20-25%

OSHA PEL N/K

ACGIH TLV: N/K

LIMITS, THE LEL BELOW THE STATED LIMIT & TO REMOVE

RTECS: 9999999ZZ

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INGEST:MAY BE HARMFUL IF SWALLOWED.
EYES:CAUSES IRRIT. REDNESS, ITCH, BURNING SENSATION & VISUAL
DISTURBS MAY INDICATE EXCESS CNTCT. SKIN:MAY CAUSE SLIGHT IRRIT.
DRYNESS, ITCH, CRACKING, BURNING, REDN ESS & SWELL ARE ASSOC
W/EXCESS CNTCT. INHAL:VAP & SPRAY MIST MAY BE HARMFUL IF INHALED.
VAP GENERATED (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:AT ELEVATED TEMPS IRRIT EYES, NOSE &
THROAT. CHRONIC:AVOID LONG TERM & RPTD CNTCT. PROD CNTNS TITANIUM
DIOXIDE. ANIMALS INHAL MASSIVE QTYS OF THIS DUST IN LONG-TERM STUDY
DEVELOPED LUNG TUMOR S. STUDIES W/HUMANS INVOLVED IN MFR OF THIS
PIGMENT INDICATE NO INCRD RISK OF CANCER FROM EXPOS. POTNTL FOR
(SUPDAT)
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

First Aid:INGEST: DO NOT INDUCE VOMIT. EYES: FLUSH IMMED W/PLENTY OF
WATER FOR AT LEAST 15 MIN. SKIN: FLUSH IMMED W/PLENTY OF WATER
FOLLOWED BY WASHING W/SOAP & WATER. INHAL: REMOVE TO FRESH AIR.
APPLY ARTF RES P & OTHER SUPPORTIVE MEASURES AS REQD. OTHER: IF
INGEST, ANY TYPE OF OVEREXP/SYMPS OF OVEREXP OCCUR DURING OR
FOLLOWING USE OF PROD, CNTCT POIS CTL CTR, EMER ROOM OR MD IMMED;
HAVE MSDS INFO AVAIL.

Flash Point Method:PMCC
Extinguishing Media:USE NFPA CLASS B EXTINGS (CARBON DIOXIDE, DRY CHEM
OR UNIVERSAL AQ FILM FORMING FOAM) DESIGNED TO EXTING CLASS
(SUPDAT)
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP.
WATER SPRAY MAY BE INEFTIVE. WATER SPRAY MAY BE USED TO COOL CLSD
CNTNRS TO PVNT PRESS BUILD-UP & (SUPDAT)
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE OR BURST
(DUE TO THE BUILD-UP OF STEAM PRESSURE) WHEN EXPOSED TO EXTREME
HEAT.

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/PROPER
NIOSH/MSHA APPRVD RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN
AREA. REMOVE ALL SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST,
VERMICULITE OR OTHER MA TL & PLACE INTO CNTNRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LARGE
QTYS IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS
IIIB COMBUSTIBLE LIQUIDS. PROTECT FROM FREEZING.
Other Precautions:IF THIS MATERIAL IS PART OF A MULTIPLE COMPONENT
SYSTEM, READ THE MSDS FOR THE OTHER COMPONENT OR COMPONENTS BEFORE
BLENDING AS THE RESULTING MIXTURE MAY HAVE THE HAZARDS OF ALL OF
ITS PARTS.

Respiratory Protection:WHERE VENTILATION IS INADEQUATE, USE A SUITABLE
NIOSH/MSHA APPROVED RESPIRATOR.
Ventilation:PROVIDE GEN DILUTION OR LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGREDS BELOW LOWEST SUGGESTED EXPOS (ING 6)
Protective Gloves:NITRILE, NEOPRENE OR LATEX GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPRVD EMER EYE WASH & DELUGE SHOWER
PROT CLTHG INCL IMPERMEABLE APRON. CLEAN/DISCARD CONTAMD CLTHG &
SHOES.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO: & PASTEL BASE. EXTING MEDIA: IIIB COMBUST LIQ
FIRES. FIRE FIGHT PROC: POSS AUTOIGNIT OR EXPLO WHEN EXPOS TO
EXTREME HEAT. IF WATER IS USED, FOG NOZZS ARE PREF. EFTS OF OVEREX
P: INHAL OF DUSTS FROM COATINGS IS VERYLIMITED. SINCE OVEREXP NOT
EXPECTED, THERE IS NO SIGNIFICANT HAZ FOR MAN.

Boiling Pt:B.P. Text:>212F,>100C
Vapor Pres:17.3
Vapor Density:HVR/AIR
Spec Gravity:1.24
Evaporation Rate & Reference:34 (BUOAC=100)
Solubility in Water:55.3%
Appearance and Odor:VISCOUS LIQUID W/ODOR CHARACT OF CHEMICAL FAMILY &
ANY SOLVS LISTED IN INGREDS.
Percent Volatiles by Volume:70.40

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG
OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PROD WHEN HEATED.
WELDING/BRAZING/FLAME CUTTING MAY PRDCE FUMES INCL:CARBON MONOXIDE,
FORMALDEHYDE.

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF IN ACCORDANCE
WITH FEDERAL, STATE, PROVINCIAL & LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH AN APPROVED WASTE MANAGEMENT FACILITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.